Norton Hospital

My First Video Over 300 Views and My Fastest to 100 Views by Mike McCarthy

On July 29th, I posted that I had hit a milestone on my YouTube site. I had posted 30 videos and one of them was at 221 views. Since then, I have posted a few more videos and have hit another milestone on views.

My most popular video is still the video on splitting limestone with feathers and wedges. It is a time-lapse video that shows me splitting the off-fall from one of my birds for "Cor Liberum". I know many folks who post on YouTube would laugh at being happy about getting a video over the 300 mark in views, but everyone has to start somewhere. This video currently has 328 views.

The other cool thing is that my videos are increasing in views faster now than they previously had. It is partly that I have been sharing them on this blog, but there must be something more to it than that. For example, the splitting limestone video was posted on August 20, 2017. My latest video, "Carving an Indiana Limestone Vessel" was posted August 28, 2018, and has already reached 108 views. While the splitting limestone does far exceed the views of the vessel video has received almost 1/3 the views in 6 days. This one is definitely an anomaly as many of my videos have not even come close to 100 views. But the cool thing is that all of the videos are steady increasing in views. So, if you like to see the way stone is worked and carved, subscribe to my channel https://www.youtube.com/channel/UCLZ4k8l6V2l_otGckDxxQ5A and watch my videos!

Carving a Limestone Vessel by Mike McCarthy

I started carving an Indiana Limestone vessel a few months ago. However, I have been so busy with other projects that I have not been able to get back to it. The stone is a cut off from my Norton commission, "Cor Liberum". I am happy to say that the off-fall from that project has provided a steady source of stone for a while.

This piece will be similar to the piece I carved about a year ago, "Peace Lilly". I will be sanding and polishing this piece to at least 400 grit paper and then putting a sealer on it. I will also add a wax finish to the piece. It will give a rich color to the piece that is not typical of limestone. However, it is a very warm and pleasing finish for indoor pieces.

Finally...The "Born From The Broken" And Some Others Are Finished by Mike McCarthy

Untitled Bordiglio Marble Contemporary Sculpture

Untitled Bordiglio Marble Contemporary Sculpture

Over the last few weeks is I have been unable to work down in the studio on my larger work because of a sick dog. The only good things about this is that I have had time to work on some of the small pieces that I can do in the house.

Stained Indiana Limestone Sculpture - "Born from the Broken"

Stained Indiana Limestone Sculpture - "Born from the Broken"

Since February last year, I spent the vast majority of my time on a large public commission for Norton Hospital. The sculpture was too large and complex to have time to work on anything other than this one piece. I had other commissioned work, but could never feel confident to get to that, much less the myriad of ideas I have in my head just waiting to find their way into a piece of stone. That commission installed in April. Once complete, I immediately began work on the two larger pieces that have been delayed. I started carving a fountain that is a commissions well as an abstract piece for a show later this summer. While it was great to start in on some fresh ideas and pieces, I still had some small work that I had started prior to starting the Norton commission, as well as the many ideas that are just waiting to burst out of my head. I really thought that after the Norton sculpture was completed I would have time for both the larger work and the smaller pieces. It just hasn't happened. 

Tortoise Shell Alabaster Contemporary Sculpture

Tortoise Shell Alabaster Contemporary Sculpture

So, two weeks ago one of our dogs got sick. Because of the nature of the illness, she needed constant supervision. That meant that I couldnt work in the studio. While that has put some stress on finishing the larger work, it has provided the room in the schedule to complete a few of the smaller pieces that I has already started as well as get some ideas out of my head.

The untitled tortoise shell alabaster piece that is pictured here is one of the pieces I started over a year ago. Because of the difficulty of the stone to carve, I had set it aside in favor of other pieces several times. That piece is now complete.

I also had started a soapstone baboon that was not going in the right direction. I set that one aside as well and had not been able to return to it. I have started back into this one as well. (You can also see my dog is up and moving now!!)

Not only did I have the two (and many others) that I started and have been unable to get back to, I also have been looking at so many of the pieces of stone in my studio that I have not been able to start. That has now changed.

IMG_0524.jpg

I have started and completed two other small pieces. The first was a piece that actually broke off of the large figure from my Norton commission. When it broke off, I was devastated. Several times I started to throw the piece out because it disgusted me. For some reason I never did. I am glad I did not, as I feel it turned out into a pretty nice piece.  I also started and finished a piece of Bordiglio Marble. This is a piece of marble that has been split off of a 3/4 life-size figure I am in progress on. It was a thin piece and I thought I saw something else in it, but it changed its mind and we ended up with the nice little piece that is on the double poles. 

So, the good news is that my dog is on the mend and next week I will be able to get back into the studio. But what it taught me is that I still need to take a bit of time to work on the small pieces that have provided such a great sense of accomplishment this past two weeks.

Three In-progress Pieces are Under Way by Mike McCarthy

After working on my Norton Hospital commission for so long, I have had a flood of ideas flowing from my brain that I almost can't control them. I have started on several new pieces and have a new commission that I also have been working on the moquette to show the client. I have set a rotation to work on the various pieces so that I keep sane!

The first is from a piece of Tortoise Shell Alabaster. This is a really cool piece of alabaster I have had for about a year. I started carving it soon after I got the rock, but it is a very fragile stone so I put it aside. Then the Norton Commission happened and I was swamped. Now that "Cor Liberum is done, I saw the stone sitting on the shelf and it started calling to me to say I know where I want to go. It has such great color and dimension, it was telling me all I had to do is cut some cool shapes in it and it would work. 

The second piece I am working on right now is a larger Indian Limestone piece that I am going to submit to the Josephine Sculpture Garden show. Josephine is a very cool sculpture garden in Frankfort, KY. The owner, Melanie VanHouten converted her family farm into a sculpture park. I really hope that my work is chosen to be part of the show as I think the garden is such an awesome deal. So, I am back to working on a piece I started about two months ago when I couldn't stand to not get the idea out of my head and committed to stone in at least a partial way. The cool thing was that because of finishing up "Cor Liberum" I had to set this piece aside. I needed that from a scheduling point of view, but the piece needed to sit and let me understand where it wanted to go. The stone and I have agreed on a direction and I think I have a better understanding. It is funny how stone communicates with you. Sometimes it says that it wants to go in a different direction. You just have to listen.

The third piece I am working on is a really different idea for me. Several years ago when I was working in steel, I started welding up an abstract sculpture of a sail boat. the plan was to have a piece of angle iron serve as the ship with a steel sail. I am really not doing any metal sculpture now. However, I have done a lot of cleaning to be able to have space to store all of the left over stone from "Cor Liberum" and I ran across this welded start.; Since I already had this welded piece, I thought, rather than throwing it out,  it would be nice to go ahead and finish it. I have decided to try a limestone sail to see if that works with the rest of the sculpture. Stay tuned to see how it goes.

 

A Change in Direction Continued by Mike McCarthy

in. Recent post, I talked about how sometimes you think you know where you are goi with a piece and then the stone says “nope”. Then there are times when, after you and the stone have agreed on a direction, friends give you ideas to consider for a different direction. On this piece, both occurred. 

This piece started its life as a part of the leg of my Norton commissions large figure. When standing the figure up, it broke off. After I stopped crying and really took a look at this piece, I liked the shap of the piece. With a little refinement, I thought I had something, but the stone disagreed.

In the first photo, you can see the original idea starting to take shape  however, the stone just kept fighting me. As I worked around the stone, certain views worked, then others would work, but the stone wouldn’t cooperate to look right as a whole. So, I finally listened.

the second photo shows where i got to after listening to the stone. By freeing up part of the front, it started to feel right. I moved on and finished carving and sanding. I decided to stain it and was contemplating how to base it.

I posted the third photo on Facebook and got an interesting suggestion. One of my friends suggested hanging the piece rather than basing it. I haven’t totally decided, but am leaning towards that. 

Check back and see how it turns out.  

IMAGE.JPG
IMAGE.JPG
IMAGE.JPG

"Cor Liberum" is Featured at Norton Open House by Mike McCarthy

My Mom and brother Larry (showing his best side) infant of the Care Giver and Patient 

My Mom and brother Larry (showing his best side) infant of the Care Giver and Patient 

This past Thursday, many folks braved a cool rainy day to come out and see the new things going on as Phase 1 of the Norton Audubon Hospital expansion opened to the public. 

In the morning, the Norton Audubon Family gathered in a tent outside the new emergency entrance. Jon Cooper made some nice opening remarks and then tours began. "Cor Liberum" was one of the stops on the tour. It was great to share the concept and meaning of all of the elements contained in the sculptural experience.

A different view of the Patient

A different view of the Patient

In the afternoon, there was another section of the open house. This was for the public and media. The opening program was quite a bit more involved. However, Jon made some really nice remarks about the sculpture and I received a nice round of applause. Then the tours began again. I was again able to share all of the meaning of the components of the sculpture to a larger audience. I was also interviewed by one of the local news channels, WLKY did a short interview with me that made it on the news. One of the other channels, WDRB also had a nice shot of the sculpture that made it on the news. 

Most important to me, I was able to have some of my family in for the open house. My brothers Kevin and Larry brought my mom down from Chicago for the celebration. They got to stand in the rain with me while we waited for tour groups to show up. (However, they disappeared under the covered area when the tours were there so they didn't get as wet!) All in all, even though the weather didn't cooperate, it was still a very fun day sharing the all the meanings and significance of "Cor Liberum".

"Cor Liberum" is Complete! by Mike McCarthy

I'm finished! After seven months of carving, I have completed my largest and most ambitious project of my career as an artist. (And to that same end, I am writing my most ambitious blog post!) This is not just a sculpture, but a sculptural experience.

The model for "Cor Liberum"

The model for "Cor Liberum"

Picking out stone for "Cor Liberum" at the Indiana Limestone Quarry

Picking out stone for "Cor Liberum" at the Indiana Limestone Quarry

In February, 2017, I was invited to compete with four other local artists to create a sculpture that expressed the history and philosophy of the Norton Hospital Audubon Campus facility and family. We were to consider major historical events as well as the central themes that have defined the institution. Surprisingly, it did not take much time at all to create my vision for the experience. I only went through 3 or 4 versions before settling on my final vision for the project. I assembled a model that brought my vision to life. I then worked with my wife and a fantastic artist representative, Keen Nichols to create the written portion of my proposal. I am not a writer at all, but Keen really listened to what I had to say and could "see" my vision for the experience. Additionally, Keen was the one that suggested the title, "Cor Liberum".  I loved it. (I loved it even more that I didn't have to come up with the name.) In addition to these two pieces of the puzzle, I decided to carve a mini version of one of the birds that were part of my vision. The main elements of my vision were to be produced out of Indiana Limestone, and I wanted the committee to have a physical element that they could touch and feel to understand what that material is. With all of that done, I took all of my stuff and went to the interview.

The raw block for the Caregiver (Large Figure). You can see the mokkett sitting on top of the figure.

The raw block for the Caregiver (Large Figure). You can see the mokkett sitting on top of the figure.

The interview was a 30 minute presentation to a committee of representatives of Norton Hospital, including Jon Cooper, the CEO, and Norton Hospital Foundation. I was scheduled to present first to the committee. It was a good thing, because I was so excited to share my vision, I couldn't wait to get in and get in front of the committee. Also, I wanted to share the model and the bird in a specific sequence. By being first, I was able to get into the room and cover the model and bird so that I could reveal them at the right time. Even with all of the thought and planning on how to reveal my model and bird, things changed.

The interview did not start all that well. I came into the conference room and introduced myself and I handed out my presentation book. I started sharing my vision for the project. I hadn't gotten through my opening remarks when the head of the foundation stopped me and asked if I had any visuals. I decided I had better change my plan for the presentation and uncovered my model and bird. The room went from a bunch of blank faces to total engagement. I went back to sharing my vision and was able to have a great conversation with the group about each element of the experience and why it was important. The committee was so engaged that after 40 minutes, one of the members said that we really needed to stop because we were eating into the next artists time. From that point on, I knew that if my vision was not chosen, I had at least made it a difficult decision for the group to choose a different option!

Care Giver progress shot

Care Giver progress shot

The interviews were on a Friday and we were told we would be contacted on the following Friday to let us know who was awarded the commission. However, on the following Monday, I received a call from Joe Myers, a member of the committee. Joe was the person who had originally contacted me about the sculpture. Since is was only Monday, I assumed he was calling for clarification at best, and possibly to let me know that my proposal had been eliminated. He asked me how my day was going, and then said it was about to get much better and told me that I had been awarded the commission. He said that the decision was made so fast because my vision for the experience touched on all of the points that the committee wanted brought to life and they were so excited about it that they could't wait to tell me! It was one of the better phone conversations I have had!

Care Giver progress shot

Care Giver progress shot

 So, off to work I went. The first step was to pick out the blocks that I would use for the project. I went up to the Indiana Limestone Co. quarry and met with Brent Blackwell. Brent has a great eye for the right stone and how it will match for the piece you are working on. We drove around the quarry showing me 12 different blocks. We picked out three blocks that I liked, two for the central figures and one for the birds. The best part of the three blocks is that the two that I picked out for the central figures were "brothers" in the quarry. They were in the ground end to end. That was perfect! The three rough blocks had a combined weight of over 78,000 pounds. Brent cut them down a little to my specifications. After trimming, the 3 blocks ended up at 23,000, 17,000 and 18,000 pounds. I also ended with an extra block as one of the off fall pieces ended up 8' x 4' x 1'. With the off fall block, the blocks for the figures and birds ended up at 62,800 pounds.

Care Giver progress shot

Care Giver progress shot

I arranged for transportation of the blocks and "Cor Liberum" was officially under way. I  started with the largest of the blocks, the one for the birds. I started with this one as the studio is too small to have all 3 blocks in it at the same time.

Care Giver before standing her up

Care Giver before standing her up

The birds block was pre-cut 2/3 of the way down the block in seven segments because the quarry will not cut the block all the way through, so it came in at 23000 pounds. I had to cut the rest of the way down the stone to free the birds. This also allowed the stone to be moved into the studio in smaller pieces to make it easier to bring the other two blocks in. If you have never seen how big a 23,000 block of stone looks sitting on the back of a flat bed semi trailer, imagine an SUV sitting there. Then, if you haven't seen that block being lifted off the flat bed and set on the ground, you don't know what you are missing. I think it is one of the most amazing things to see how a crane works. I also think about the ancient artists that did all of this moving of stones without the assistance of these modern miracles.

The Care Giver after the repair of the broken leg

The Care Giver after the repair of the broken leg

Over the next month I got a good start on the birds and then brought the two blocks in for the figures. I spent the next seven months carving the figures and birds. While I made good progress, there were times where I couldn't see the end. Other times where I felt like all was going well. Towards Thanksgiving 2017, I realized that I would need some help with the finishing of the elements. I got that help from Karen Terhune and Chris Mozier, two local artists who also work in stone. Once I received a commitment from them, I felt a lot better about finishing the project on time. 

All projects have challenges, and "Cor Liberum" was no different. Looking back, I can remember many swings in my emotions. The biggest challenge came when I was standing up the large figure. I misjudged the placement of a wood block that was designed to keep the piece from slamming forward and possibly tipping too far. While the piece did not keep going over, it did slam down very hard and a very large section on the bottom broke off. I couldn't believe it. I called my wife and told her I had ruined the piece! I worked on it a bit and felt that I could possibly make it work without starting over. I did some work on it and finally decided I needed to get going on the Patient to really know if the two would work with each other. As it turns out, Once I had a chance to settle down, get the patient stood up and really look, I realized that the bottom of the figure was too large anyway. It didn't fit with the smaller figure. I was able to rework the bottom and fix the problem.

Patient progress shot

Patient progress shot

The challenges did not stop with that. The next problem was a bit of an issue with the History pillars. The information to be inscribed on them was due from the hospital by July. That would enable enough time to order the stone, receive it, deliver to the monument company, receive it back and get them installed. Around August, we decided that there was too much information for the original design of the pillars. We went through several renditions until we decided on a new design. The only issue was that this process took until October. When I ordered the stone, the first company I talked to could not guarantee that they could complete the order until the end of January. That would not leave enough time to get the pillars to the monument company and back in order to install them on time. I contacted another company and they could not commit to a time either. In the end, I ordered the stone from both companies in the hope that one set would arrive by mid January. Of course, neither did. To add insult to injury, both sets arrived the same day so I was never able to cancel one of the orders. As a result, I now have a second set of stone to add to my already overloaded supply. But, you have to take the positive view that you can never have enough stone can you?

Patient progress shot

Patient progress shot

While all of the carving of stone, moving of stone, standing up of stone, ordering of stone, etc., was being done, I was also meeting with the engineer, meeting with the Norton staff, setting schedules, communicating with the installers and many other small detail to keep other on job-site things underway. The major part of the onsite work to be done was grading the courtyard and setting up the footers and walking path.

IMG_1712.jpg

 

The courtyard where "Cor Liberum" is installed used to have two large trees. The trees had been cut down and the site had a very large mound in the center. As part of the experience, i have a curving path that has a slight incline up to the center figures and then a decline back away from the center. My original contractor that was supposed to grade the area and do the concrete work was a no call no show twice. After the second no show, I fired them in November and hired Kelsey Construction. Unfortunately, Kelsey was three times the cost of the original contractor. Also, they were not able to get to it right away. Kelsey planned to start in January. Of course, the December weather in Louisville was perfect for pouring concrete. January, not so much! We went through several delays. I was really getting nervous about being able to hit a March completion deadline for the project. By late January, I didn't have any concrete poured, nor did I have the stone to wrap that concrete or create the History Pillars. As you can imagine, I had many sleepless nights.

IMG_1722.jpg

Sometimes you are good, and sometimes you get lucky. The last week of January, I was ready to call my installers Methods and Materials out of my hometown Chicago, and tell them that I had to put them off. Given their booked schedule, if I had had to do that, I don't know when I could have gotten them back in town. Thus, the luck. On Monday of that week, I had made the decision to call them and tell them I had to cancel the installation. I had originally planned to call them first thing Monday morning, but ran into some things at work that kept me from calling. At 10 am, i got a call from Rick with Kelsey Construction asking me if I could come over and approve the footer location because they were planning on forming them and pouring on Tuesday. I hadn't herd anything from them in about two weeks, so I was pleasantly surprised, we were back on our way. Not more than 5 minutes after I got off the phone with Rick, I got a call from one of the stone companies that they had finished the stone and it was ready to ship. I called the second company to cancel the second order and they said it too was done and was ready to ship. Another financial setback, but finally, things we looking better. We weren't out of the woods, but it was looking more positive than it had in a long time.

IMG_0011.jpg

Over the next three weeks, the fosters were poured, the sidewalk was formed and poured, two orders of stone arrived and the stainless steel poles were ready for pick up. My neighbor and good friend Mark Hendren with Lay-em-all Masons installed the limestone wrap around the concrete base for the pedestal for the central figures. It was a whirl wind of activity that was moving nicely. The best news was that I was able to keep the guys from Methods and Materials on schedule and set for the last week of February. I was on an emotional high at this point.

My next challenge came when I picked up the stainless steel. In my original proposal, the tallest stainless steel post was to be 20' tall. I did that because stainless comes in 20' lengths. I was pushed by Joe Meyers to consider adding some height to the birds. We even went out and did some tests to see how things looked at the 20' height. After some thought, I agreed to raise the top bird to 26' , the next to 24' and the third to 20'. I was not real happy about partly because of the additional cost welding the extra length would entail, but more importantly because I thought that it would create too much separation between the top birds and the rest of the experience. I was also very concerned about the look of the stainless. I had always pictured it as a very dull mill finish and I didn't think the welding would be able to be ground back to a similar finish. However, I agreed to add the height and figured I would deal with the consequences if they came. The consequences came!

The birds as their caps are epoxied in place

The birds as their caps are epoxied in place

When I approved the welding finish at the fabricators shop, It was a really cloudy day. I wasn't totally thrilled with the finish, but they assured me that it would dull down over time. On delivery day, I showed up with a truck and was too busy to really pay attention to the finish. Mark Hendren met me at the hospital where we unloaded the poles on to his trailer to move them into the courtyard. Because of the height of the lower lever where we had to unload the poles, it took forever because we could use a standard forklift. We had to take each individual pole and strap them to a low profile lift to get them close to where they need to be in order to be set. I was so focused on the logistics that when I finally got them to the site and had a chance to see the finish, I couldn't stand it. The welding jumped off the poles like a sore thumb. Once again, one of the emotional swings where I was so upset that my vision for this experience would be ruined. I decided I could not live with it and started sanding the poles. I ended up spending 2 days hand sanding the poles. I was able to use several grits of paper to finally get the poles down to a mat finish. Not as nice as the mill finish, but I am satisfied with them.

Birds and poles waiting to be installed

Birds and poles waiting to be installed

Along with sanding the poles, I also was spending time at the studio getting everything ready for transport. I had to lay the figures back down for transportation. My chain hoist is rated for 10 tons. This means it has a very large ratio of gear movement to chain movement, so it takes a long time to raise or lower. As I laid the figures down, it felt like some of the longest minutes of my life. If something went wrong and they dropped, they would be ruined. Given that we were installing the next week, that would have been a bad thing. Fortunately, all went well.

Installation day, the Patient being stood up

Installation day, the Patient being stood up

Installation day, February 27, 2017 arrived. You wouldn't think about it unless you have done it a few times, but cranes can't lift much weight at all when the boom is more horizontal than vertical. why is that important? Well, the figures, now down to roughly 6500 pounds and 4800 pounds were still inside the studio with a 12 foot tall door. The crane that would be light enough to be able to drive up onto the upper level of the entry where we had to pick the figures to install them would not have enough weight be able to lift the weight of the figures with its boom in a horizontal position to get under the height of the door. So, I scheduled a different crane to arrive at 7 am and move the figures out of the studio. This allowed the other crane to come and pick them from the parking lot so the boom could be in a safe position. That all went well. I rigged the figures for the first crane and while a little nervous to see them moving out of the studio suspended by 2 straps, all was fine.

Then came the next challenge. I was not responsible for the crane to set the figures, So, when I saw a brick truck (and a really old one at that) pull up to load and transport my lifes work of the last seven months, it was not a comforting feeling. And, at this point I had to turn over control of rigging to Methods and Materials. As the crane was setting its out riggers, a huge boom came from the crane. It scared the crap out of everyone. I was ready to send the crane away, but my installers took it all in stride and began work. They carefully rigged the figures and got them all nestled in place and sent them on their way to the hospital. They took the short drive over and the meat of installation day began.

My heart is in my throat as the Patient flys over the edge

My heart is in my throat as the Patient flys over the edge

Now, any artist that works in a monumental scale comes to realize that you are totally reliant on others to handle, rig and install your work. This is a very helpless feeling. But, Methods and Materials did such great job it made the day go by a little easier. The guys were very professional and caring. They really took their time to ensure that I was comfortable with the progress. They deferred to me on all artistic decisions even though they are all artists themselves. For the most nerve racking two days of the entire project, they did all they could to make it simple, safe and satisfying. What else would you expect from some guys from my home town, Chicago?

The first of the two figures, the patient, was unloaded and stood up.  They rigged him up and got him ready for his journey over the edge of the courtyard wall. He had to be lowered 15 feet to his new home. It was very difficult to let the guys do their work, but I managed. They lowered him down to do a test fit of the pins. They went right in the first time. The large figure, the care giver, went over the edge next and once again, the test fit was perfect! My biggest concern other than that they might get dropped was that fitting. I had made the template in the studio and kept thinking, did I have them set right in the studio? I am always second guessing myself until I see things done. The Care Giver was test fit and was perfect. That was the first moment where I really saw my vision coming to life in its setting. The figures were epoxied in place and the major part of the installation was behind us.

The Patient is in place and looks good

The Patient is in place and looks good

The next step was to set the poles for the birds. We were expecting rain the next day, so the crew worked hard and got all of the poles set on Tuesday. On Wednesday, we spent much of the day dodging rain. We finally got the five birds set on top of their poles and started welding them in place. Of course, there came the next problem. The welder the crew rented did not work. Half a day later, the rental company showed up with a replacement and the guys were able to get the welding done. The major portion of the experience was installed!

The next step was to get the backfill, lighting and landscaping done. That all went pretty well, other than one of the poles was anchored through the conduit for the electric. By this point, I figured, what the heck, it wouldn't be right if all went exactly as planned. The guys from Messer took it in stride and fixed the problem.

One of the Birds being welded in place

One of the Birds being welded in place

Finally, the last step in the process, the setting of the History Pillars. They took forever to get here, and with design changes and scheduling challenges, they cost 3 times the original budget, but they were worth it. The pillars really give the experience a finishing touch and help unify the experience. They provide context for the many elements of the sculpture. They also provide a filler element that if left out, would have left the path a little bare. It was great to see them in place and see my vision come together.

While this project had many challenges, they were all part of the experience for me of developing such a large and important work. I always strive to have my work meet my expectations. While that is very difficult, and some individual elements could have been a better match to my vision, I am very proud of the overall experience I have created. It really does match my vision. It matches the model I originally presented. And, it matches the expectations of the hospital family. For this, I am very proud of "Cor Liberum".

A night view of "Cor Liberum" completed

A night view of "Cor Liberum" completed

A day view of "Cor Liberum" completed

A day view of "Cor Liberum" completed

The Last Element of "Cor Liberum" is Now On-site by Mike McCarthy

IMG_0150.jpg

I am really closing in on the completion of "Cor Liberum", my Norton Hospital commission. Today, I went to pick up the history pillars from the monument company. They really look good. I decided to add the black litho to the lettering as I was concerned that they would not really stand out and people would pass them by. 

The current plan is to start install tomorrow, weather permitting. I am planning on doing this by myself as they are less than 1000 pounds a piece. The only tricky part is that they are beveled. This may provide a bit of a challenge getting the strap to hold with out slipping. Only time will tell!

Stay tuned for further images as this really cool project comes to an end!